ZLand® Specifications
Node specifications
Mechanical
Weight: 4.8 lb (2.2 Kg)
Height: 6 in (15.2 cm)
Diameter: 5 in (12.7 cm)
Detachable 5-in spike (12.7 cm)
Analog
Number of channels: 1
ADC resolution: 24 bits
Sample intervals: 1/2, 1, 2 & 4 millisecond
Preamp gains: 0 - 36dB in 6dB steps
Bandpass: DC to 85.8% Nyquist
Low cut filter: Out, 1-60 Hz @ 6dB/octave
Distortion (THD)* <0.0006%
Gain acc ch to ch: 0.50%
EIN RMS (preamps shorted)
0 dB 1.8 microvolt
12 dB 0.6 microvolt
24 dB 0.4 microvolt
36 dB 0.4 microvolt
Maximum input signal RMS
0 dB 1,767.5 millivolts
12 dB 442 millivolts
24 dB 110 millivolts
36 dB 27.5 millivolts
Common mode (CMRR)* >90dB
Electrical
Timing accuracy
GPS disciplined to +/- 100 microseconds
UTC
Power
Lithium-ion batteries
Longevity: 288 hours**
Recharge time: 5 hours - worst case
Flash memory
Capacity: 2 Gbyte
Data interface
Diagnostic: RS232
Data download: proprietary HS serial
Status LED indicating
Power ON, acquisition, error
Data recording station specifications
Data harvester
Mechanical
Weight:
Empty ~ 250 lb (113 Kg)
Full ~ 460 lb (209 Kg)
Capacity: 48 nodes
Height: 90 in (229 cm)
Width: 48 in (121.9 cm)
Depth: 21 in (53 cm)
An individual data collection and charging
rack (DCCR) can process up to 48 nodes.
With a five-hour turnaround,each DCCR
can process up to 192 nodes per day.
Multiple DCCRs can be joined together
into a network to increase harvesting capacity.
Data sorter
Mechanical
Equipment rack
Height: 54.5 inch (138 cm)
Width: 24 inch (61 cm)
Depth: 29 inch (74 cm)
Multiple workstations
Flat panel display, keyboard, mouse
Electrical
Data storage
RAID (Level 6)
Capacity: multiples of 10.5 TB
Output media
MDR, USB , eSATA disks and 3592 tapes
Output format
Receiver gather
*2-millisecond sample rate @ 12dB K-gain
**Temperature and humidity specifications may
vary due to media selection
FairfieldNodal reserves the right to change
specifications without notice.
Aug 2010